LP35 – LIQUID PETROLEUM GAS

LP35 is a lightweight liquefied petroleum gas (LPG)/propane delivery and transfer hose. The hose meets all Underwriters
Laboratories (UL21) and Canadian (CSA 8.1 Type I) requirements. The construction incorporates multiple textile plies of
reinforcement for flexibility and kink resistance. The perforated cover is resistant to mild chemicals, oil and ozone. LP35 is
available in long lengths on reels, long cut lengths and factory-tested assemblies from stock in
popular configurations.

LP35 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber
hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates
with potentially dangerous consequences. LP35 may be used for natural gas service, but ONLY under ALL of the following
conditions:
• The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air
movement.
• LP35 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation
and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier
constructions to convey natural gas whenever possible.

LP35 and Compressed Natural Gas (CNG): Do not use LP35 for CNG engine applications in on-road vehicles, or for high
pressure CNG dispenser/transfer applications (typically 2900 psi or greater). In other applications– where CNG is regulated to
pressures within the rating of LP35-apply the guidelines for natural gas applications stated above. Always review and adhere
to all applicable government and industry regulations and standards prior to installing this hose in a CNG or natural gas
application.

Meets or exceeds the requirements of CAN/CGA-8.1-M86 Type I; UL21
Application: Liquid Petroleum Gas

Tube: Black Nitrile
Reinforcement: Multiple textile braids for kink resistance, strength and durability.
Cover: Black Chloroprene
Temperature: -40°C to +82°C (-40°F to +180°F)

Packaging:
 1/4″ – 2”

PART NUMBER HOSE I.D. HOSE O.D. MAXIMUM WORKING PRESSURE MINIMUM BURST PRESSURE MINIMUM BEND RADIUS WEIGHT
(in) (in) (mm) (psi) (psi) (in) (mm) (lbs/ft)
LP35-025 1/4 0.61 15.5 350 1750 2.5 63.5 0.15
LP35-038 3/8 0.76 19.1 350 1750 3.5 88.9 0.22
LP35-050 1/2 0.937 23.8 350 1750 4.5 114.3 0.32
LP35-075 3/4 1.25 31.8 350 1750 6.5 165.1 0.50
LP35-100 1 1.50 38.1 350 1750 7.5 190.5 0.63
LP35-125 1 1/4 1.815 46.1 350 1750 12 304.8 0.85
LP35-150 1 1/2 2.156 54.8 350 1750 14 355.6 1.12
LP35-200 2 2.75 69.90 350 1750 16 406.4 1.90
Share This