SINGLE BOLT TRADITIONAL GROUND JOINT CLAMP
Traditional Ground Joint Clamp
| Hose I.D. | Hose O.D. Min. | Hose O.D. Max. | Torque ft / lbs | Part No. | ||||||||||||||||||||||||||||||||||
| ¹⁄₄” | ³⁶⁄₆₄” | ⁴²⁄₆₄” | 6 | BD | ||||||||||||||||||||||||||||||||||
| ³⁄₈” | ⁴⁴⁄₆₄” | ⁵⁶⁄₆₄” | 6 | CD | ||||||||||||||||||||||||||||||||||
| ¹⁄₂” | ⁵²⁄₆₄” | ⁶⁰⁄₆₄” | 6 | DD | ||||||||||||||||||||||||||||||||||
| ¹⁄₂” | ⁵⁸⁄₆₄” | 1²⁄₆₄” | 6 | 968 | ||||||||||||||||||||||||||||||||||
| ¹⁄₂” | ⁶⁰⁄₆₄” | 1⁴⁄₆₄” | 12 | B4 | ||||||||||||||||||||||||||||||||||
| ¹⁄₂” | 1⁴⁄₆₄” | 1¹²⁄₆₄” | 12 | B5 | ||||||||||||||||||||||||||||||||||
| ³⁄₄” | 1¹⁰⁄₆₄” | 1²⁰⁄₆₄” | 21 | BU9 | ||||||||||||||||||||||||||||||||||
| ³⁄₄” | 1²⁰⁄₆₄” | 1³²⁄₆₄” | 21 | B9 | ||||||||||||||||||||||||||||||||||
| ³⁄₄” | 1³²⁄₆₄” | 1⁴⁴⁄₆₄” | 21 | B10 | ||||||||||||||||||||||||||||||||||
Safety Alert
* The bolts used in the Boss interlocking clamps are not standard bolts. They vary from standard bolt in their length, diameter, overall thread length and material hardness. These bolts can be re-torqued, but it is not recommended that the bolts or clamps are reused, as they are designed for a single bend only. We recommend using only factory supplied replacement bolts.
* Torque values for clamps are based on dry bolts. The use of lubricant on bolts will adversely effect clamp performance. Do not lubricate nuts and bolts.